Common troubleshooting tips for semi-automatic paste filling machine

Semi-automatic paste filling machine is the most widely used equipment in paste filling machine. In the production process, due to improper operation or too long operation time, or not paying attention to maintenance, there will be failures of one kind or another. So what are the common troubleshooting skills in the daily production of semi-automatic paste filling machines?

1. The filling speed of the semi-automatic paste filling machine is too slow. At this time, it is necessary to check whether there is dirt in the filling valve, and if it is clear, remove it as soon as possible; secondly, check whether the intake pressure is normal. Check whether the blockage or the air compressor is powered on normally; then adjust the solenoid valve and throttle valve of the semi-automatic paste filling machine, and adjust the screw to the appropriate position.

2. The filling port of the semi-automatic paste filling machine drips oil. In this case, check whether there are particles in the filling valve. If it is clear, it is fine; check that the four low-angle screws of the semi-automatic paste filling machine are well adjusted. shaking.

These are just common faults. Of course, there may be unexpected faults in the process of using the semi-automatic paste filling machine. In fact, if you want to reduce the occurrence of mechanical equipment faults, you must do maintenance, daily maintenance, weekly maintenance, monthly maintenance, etc. , are all effective and feasible methods. Each semi-automatic paste filling machine has a long service life. Of course, it can only be used without worries thanks to care and maintenance.