How To Debug The Small Perfume Automatic Filling Machine Before Starting?
Apr 13, 2022
How to debug the small perfume automatic filling machine before starting, you can see the following 4 steps:
1. Loosen the nut of the small automatic perfume filling machine first, and then adjust the screw so that the position of the lower fixing rod changes accordingly. The push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the filling volume. The screw is adjusted clockwise to increase Quantity, otherwise decrement, in which the pointer indicates
2. Tighten the nut immediately after the adjustment, so that the lower fixing rod and the crank are firmly fixed
3. Loosen the nut, and determine the correct position of the upper fixing rod according to the different push-pull lengths of the syringe. After the lower fixing rod is adjusted, turn the crank to make the syringe turn to the top dead center, and then lift the outer sleeve of the syringe about 2mm to avoid The needle tube is rotten, and then the screw cap is tightened before starting the machine.
4. Turn on the switch after the assembly of the small perfume automatic filling machine is correct. When the machine is working, the crank will drive the syringe to pull up and down to extract the liquid, adjust the speed knob, select the appropriate dispensing speed, start normal work, adjust the governor knob, clockwise The speed of dispensing is fast, otherwise the speed is slow
