What Are The Installation And Debugging Methods For An Air-filled Vacuum Packaging Machine?

What are the installation and debugging methods for an air-filled vacuum packaging machine?

Gas-filled vacuum packaging machines require reasonable and reliable control devices for food packaging requirements, such as temperature, metering, and speed, and should ideally employ automatic control methods. For long-term production of a single product, a dedicated food vacuum packaging machine should be selected. So, what are the installation and debugging methods for a gas-filled vacuum packaging machine?

https://www.cnyouna.com/sealing-machine/bag-sealing-machine/air-inflating-bag-sealer.html

The installation and debugging of a gas-filled vacuum packaging machine are as follows:

1. Open the packaging box and remove the vacuum packaging machine. Place it on a flat and stable surface and check if its appearance is normal.

2. The equipment power cord is 380V, 50Hz. Ensure the gas supply is installed correctly. The gas supply should have a pressure reducing valve, and the pressure should be adjusted to 0.3 MPa.

3. First, connect the equipment to the vacuum pump. Ensure the gas supply is installed correctly. The gas supply should have a pressure reducing valve, and the pressure should be adjusted to 0.3 MPa.

4. Turn on the power switch. The power indicator light will illuminate. The suction nozzle and inflation nozzle will extend. Test by placing a packaging bag over the nozzle.

5. After adjustment, it can be put into normal operation.

6. After finishing work, the power supply must be disconnected before turning off the gas supply.

When installing and debugging the vacuum packaging machine, we can follow the above installation and debugging methods.