Maintenance Work Before And After The Filling Machine

The filling machine has an insignificant position in the current processing industry. It is one of the important equipment for the production and processing of many food, beverage, pharmaceutical, and daily chemical enterprises. However, when using it, pay attention to the maintenance work before and after use:

before use:

Check the machine carefully before use, turn the machine manually to see if the machine is running normally, check whether the material meets the requirements, and restart the machine if everything is normal; try to use it in a relatively airtight place with a suitable temperature, if there is material overflow If there is leakage, it should be cleaned up in time; when adjusting the equipment, the power supply should be turned off in time. After adjustment, the parts of the equipment should be strictly inspected to ensure normal operation;

After use:

Also pay attention to its maintenance. When dismantling and washing the piston and the fixing screws during maintenance, so as not to affect the process requirements of the other when the first one is dismantled. Before cleaning the piston filling machine, the remaining products in the filling machine should be removed and cleaned, and then the material barrel should be filled with soft cleaning solution. The cylinder has been lubricated before leaving the factory. Please do not open it or add any lubricating oil to ensure that the surface of the filling machine is clean and clean, and power off when not in operation. In addition, while insisting on maintaining and using the filling machine correctly, it is necessary to carry out regular inspection and debugging. Only in this way can the filling machine work in a healthy and stable manner.