Home / Products / Filling Machine / Liquid Paste Filling Machine / Content

Products

Wine Filling Machine

1. The pump head is drive by magnetic power, the pump head is not connected with the motor, so don't worry the motor will over load or leakage by the connecting shaft.
2. The pump head is made by 316L stainless steel which is anti-erode glove,and anti-corrosion.

Send Inquiry

Fast Delievery
Quality Assurance
7*12 Customer Service

Product Introduction

1. The pump head is drive by magnetic power, the pump head is not connected with the motor, so don't worry the motor will over load or leakage by the connecting shaft.

2. The pump head is made by 316L stainless steel which is anti-erode glove,and anti-corrosion.

3. Start or brake by frequency converter control which will control the rotating speed with precision as 0.01s. So that make the filling deviation less than 2%.

4. Filling range can from 5ml up to +∞, it is depend on the filling time you set.

5. Can be control the manual model, foot pedal switch, also can be automatic and adjust the cycling time.

Can fill eliquid,oil, juice, perfume, ink, water, etc for all containers such as bottles, jars, cans, etc

Voltage	220V 50/60Hz
Power	80W
Deviation	±2%
Cooling by	Air cooling
Filling range	5-5000ml+(depend on filling time)
Size	350320200MM

A:Turn on the filler
B:Set the filling time depend on your bottle volume(adjust by the add button ),and set the filling speed.
C:Adjust the waiting time depend on the gap time you need(adjust by the add button ).
D:There are two models for the "counter", model one is: when the red light is on, and the filler will work until the number you have set, that means, if you set 20, the filler will stop after filling 20 times. Model two is: the red light is off, the counter will record the filling times.
E:The decimal point can be moved by press the button.
F:Setting:Use this button can let you set the filling range easily, press this button before filling, and the it will fill when you press that, and then wait the filling, when your bottle is full, then press that button again, then the filling range is been setted and the filler will remember this data and you can use for next filling.