FM400 Matters needing attention

Matters needing attention

(1) The machine consumes a lot of power, and the input power should be greater than the marked rate power.

(2). When the machine is working, please do not touch the sealing and cutting device or touch it with other objects. Otherwise, you run the risk of being burned and items damaged. Because the temperature of the heat-generating parts such as the sealing and cutting set is very high.

(3). Please adjust the sealing and cutting time at the appropriate position according to your film. Not two long. It is enough when the film can be cut off, otherwise the sealing and cutting group is easy to burn out.

(4). After the sealing and cutting work is completed, the press frame will pop up. Don't go near the printing press, or you will. There is a risk of injury.

(5) When sealing and cutting, red and smoke appear, please cut off the power quickly. You can go back to work when it's fixed.

(6) If you only need to seal and cut, please turn off the shrink heating switch, fan motor and conveyor; if you only want to shrink, please do not press the pressing frame.